Additional Features
Additional features come in the form of front covers, standard or roll up doors, mounting options and can be added to our standard dome sizes or to special orders.
​
Additional features are not included with our standard domes, however our team are here to help. Whether it's ordering a front cover or helping you to source sea containers or mountable leg options for installation.
Our domes do come with all fittings, base plates for mounting and installation manual.
Front Covers
An option for our customers is to order front walls with 4x4 roll up doors.
Ideal for securely enclosing your equipment or added moisture protection for hay and stock feeds.
​
The door is sealed using a combination of Velcro and clips. Opening and closing the door; you open your clips, start opening the Velcro and then use the rope and pully system, reclipping in place once opened to top or fully back down.
Back Walls
An option for our customers is to add a back wall to their dome, this can be done at the same time as you initially purchase your dome or can be added later should the need arise.
Ideal for securely enclosing your equipment or to make into self-contained workshop.
​
Back walls are measured by their Width and Height and can be added to any length dome shelter in our 6m or 12m long series.
​
Any back wall can be converted to suit a High Cube container as we have extension kits which are simple and easy to add at time of installation.
Partial Panels
Partial panels are ideal to finish off fully enclosing your dome area, like we can see in this photo with one of our customers who connected one to their site office to finish their assembly.
​
These are also a good option when you don't need a full back wall to allow air flow if needed on all sides (achieved when mounting onto our steel legs instead of shipping containers).
​
Partial panels are measured by their Width and Height and can be added to any length dome shelter in our 6m or 12m long series.
Top Covers
An option for our customers is to add a top cover to an existing dome they have onsite. We can work with you to determine the correct size to suit your requirements.
Fully Engineered
Description of material:
Galvanised surface (zinc coating 600g/sqm), welded by H beam, 200x204x12x12mm, 56kg/m, Q345B, with M18 bolts, nuts and washers.
​
Securing legs to the ground:
Cage bolts are concreted into the ground on footings. Legs are lowered onto these and tightened up. And then the rails are lowered onto of legs and bolted up.
​
How is it attached to the dome:
The base plate is welded onto the rails at the required spacings and for each side of the dome, ready for the assembled arches of the domes to be lowered and connected to the base plate with bolts.
